How We Repair Your Frymaster Floor Fryer
Deep fryers heat oil with gas burners or electric elements and rely on thermostats and a high-limit safety switch.
Every Frymaster model has its own parts list, so we start with the model and serial number on the rating label. That tells us the correct parts and any known issues or service bulletins for your unit.
Safety first: Never service a fryer with hot oil in it. Let it cool completely first.
Common Floor Fryer Problems We Fix
Leaking oil
A worn drain valve or a cracked fry pot.
Will not heat
A failed element or pilot, a tripped high-limit, a bad thermostat or, on gas units, a thermopile or gas valve problem.
Oil overheats
A faulty thermostat or temperature probe. Stop using the fryer until it is checked.
Pilot will not stay lit
A weak thermocouple or thermopile, or a dirty pilot orifice.
Slow recovery
Scale or carbon on the elements, a weak burner or a thermostat out of calibration.
Quick Checks Before You Call
These are safe for most owners and sometimes solve the problem without a visit:
- Press the high-limit reset after the oil cools.
- Make sure the gas valve is fully open.
- Boil out the fry pot on schedule.
Still not working? Call (844) 442-1500 or try our troubleshooting wizard.
Our 5-Step Repair Process
- Call or book onlineTell us what your Frymaster floor fryer is doing and when it started. We schedule the first available visit, with priority for equipment that is stopping your business.
- DiagnosisThe technician checks power, controls and the parts most likely to fail, using the model's service data and test modes.
- Upfront quoteYou get the cause, the repair and the price before any work starts. If repair does not make sense, we tell you.
- RepairWe install original or equivalent parts matched to your model and clean up when we are done.
- Test and warrantyWe run the appliance through a full cycle to confirm the fix. The repair is covered by our 90-day parts and labor warranty.
Parts We Replace Most Often
- Heating elements
- Thermostats and probes
- High-limit switch
- Thermopile and thermocouple
- Gas valve
- Drain valve
Cost and Lifespan
Most floor fryer repairs cost $150–$500 including parts and labor, and these appliances typically last 7–12 years. These are national estimates: your exact price comes after the diagnosis. Use the repair vs replace calculator to compare.
Keep It Running Longer
- Filter oil daily
- Boil out the pot weekly
- Calibrate the thermostat a few times a year
Floor Fryer Repair in Florida
We repair floor fryers in 349 cities and towns across Florida. Long, humid summers in Florida push refrigerators, ice makers and AC units in homes across the state hard for most of the year.
Frequently Asked Questions
How much does Frymaster Floor Fryer Repair cost in Florida?
Most floor fryer repairs fall between $150–$500 including parts and labor. The final price depends on the part that failed and your model. You get an exact quote after the diagnosis and before any work starts.
Can you repair my floor fryer today?
Same-day visits depend on technician availability in Florida. Call (844) 442-1500 early in the day for the best chance of a same-day or next-day appointment.
Is the repair guaranteed?
Yes. Parts and labor are covered by our 90-day warranty. If the same problem comes back within that time, we return and fix it.
Do you work on all Frymaster models?
We repair current and older Frymaster models. Some discontinued parts can be hard to find; if that is the case for your model, we tell you before you pay for a repair.
Should I repair or replace my floor fryer?
A floor fryer typically lasts about 7 to 12 years. If yours is well inside that range and the repair costs less than half the price of a new one, repairing usually makes sense. Near the end of its life, or when the repair costs more than half of a replacement, replacing is often the better value. We give you an honest opinion either way.